Do you suffer from toxic mold and mildew, basement molds that cause musty smell and odors? The odor caused from mold spores is common in basements, crawl spaces, and rooms with lack of circulation.

>>    See: Air Purification To Get Rid Of Nasty Odors and Mold Spores

Since these crawl spaces and basements are dark and have no circulation they are perfect from mold amplification.

It is common when having a lot of visible mold, that black mold symptoms could be felt from the amplification of mildew on the surfaces of walls. Even having a small amount of mildew and mold within the basement, one could become quite sick just by walking into the confined area.

This occurs because there is no circulation of fresh air and when inhaling the airborne mold spores in a warm musty basement the toxic mold spores will enter into the system and attach into the bodies lungs and. This can create some harmful black mold symptoms and allergies, such as feeling a common cold symptom and coughing and headaches.

Finding a solution to preventing black mold and mildew is still probable. The circulation of air is the first priority, fresh air circulation is mandatory. To decrease mold growth you will have fresh new air being circulated into the basement or crawl space.

>>  Click here for info on dehumidifiers

A popular issue that arises in killing mold mildew in a basement is looking through the carpeting. You have to be aware if you had a problem or leak that started in the basementor any type of leaks and water intrusion. If so black mold may be on the carpet and rather than hiring a carpet cleaning company you may want to replace the entire carpeting. Since the carpeting became extremely wet it will be impossible to remove the spores from the old carpet.

Many forget to remove tack stripping below these carpeting. This is very common with basement mildew mold, it is important remove the old carpeting and the moldy tack strips. The wooden tack strips can carry quite a bit of mildew and mold. You may want to look into using a killing mold and mildew with an organic cleaning product that cleans mold or if it appears to be a big problem you can always look into hiring a mold inspection and testing company.

Killing mold and mildew may be a never ending solution, just remember to use a mold blocker and cleaner to kill and prevent mold. Many cleaners will kill mold for a bit, but not prevent it from future growth. If the mold proble becomes a serious issue you should look into a mold inspection and testing. The inspection company gets things moving and creates protocols for mold remediation and decontamination company.

So if you are finding a musty odor in the house, you may have mold or a previous water event that was not taken care of correctly. If ever needing more information on black mold visit a free Mold Removal Website that offers information from a certified microbial consultant.

By: Markus Skupeika Article Directory: http://www.articledashboard.com

Killing mold and mildew may be a never ending solution, just remember to use a mold blocker and cleaner to kill and prevent mold. Many cleaners will kill mold for a bit, but not prevent it from future growth. If the mold problem becomes a serious issue you should look into a www.adviron.com“>mold inspection and testing List of Black Mold Symptoms

Toxic Mold LawyersandSettlements.com

The Meng family had no warning that poisonous mold had developed behind their walls—there were no signs other than the symptoms of illness they developed. They sued the builder and won $4.75 million in damages 

Dangers of Toxic Mold Exposure to Your Family

Symptoms of allergies due to toxic mold exposure include sneezing, runny nose and nasal stuffiness. The eyes may become red, watery and itchy. These may also be accompanied by redness or rashes on the skin.

Guardian Preservation Services

The Governors of these states signed a proclamation that asserts the dangers of toxic mold and the need for awareness. The proclamation states an estimated 500000 people in the United States die each year from exposure totoxic mold … The proclamation lists the symptoms of mold including dermatitis, cough, rhinitis, nosebleeds, cold- and flu-like symptoms, headache, general malaise and fever and says mold-poisoning is a chronic, debilitating condition

Shower Mildew – Shower Mold

Mildew is a type of fungus which grows in warm and moist conditions. A shower is a perfect place for the growth of mildew as it is both warm and damp. The best way to keep out the shower mildew is to keep your shower dry.

Technorati Tags: basement, black, exposure, house, household, how to, kill, killing, Mildew, mold, molds, odor, odors, products, remediation, removal, toxic

Basement mold is the most common mold that you will encounter in your home. This is because the basement is underground and is usually not developed as the rest of the house, and so is the perfect breeding ground for basement mold which is usually black mold.

It is often a storage area where there is little heat and it is also where moisture can build up from condensation on the pipes or even a leak. The mold can actually build up quite a bit in the basement if you do not keep a close watch on the conditions, such as excess moisture and damp conditions which are the prime breeding areas for basement mold.

Once mold spores settle in your basement, they will keep growing. Mold in basements can be found on wood, ceiling tiles, wallpaper, cement, sheet rock and insulation. There is no realistic way to get rid of mold generally and all the basement mold that you have because mold spores are everywhere. Once you do find mold in the basement, though, you have to look at methods of basement mold removal and what mold killing products you can use.

You have to be careful when you are removing basement mold because once you disturb the mold spores you spread them around. Cleaning up one area could spread the mold to another part of the basement. You also have to be careful when you handle moldy materials to make sure you don’t breathe in the mold that is in your basement when you are going through the process of basement mold removal. When you set about this task, you should wear a paper facemask and gloves so that you don’t breathe in or come in direct contact with the mold.

Basement mold is one of the leading causes of allergies in homes as well as toxic mold syndrome. Not all molds are toxic, but you won’t know if the mold in basement is toxic or not until you get it tested. This is why basement mold removal is so important. Mold allergies often disguise themselves as sunus problems or flu-like symptoms and they can aggravate asthma.

When you realize that you have basement mold, the first thing you need to do is search for the cause of the mold. If you find leaks or excess moisture, you have to make the repairs to prevent the moisture from re-occurring and the mold from coming back. Then you have to take measures of basement mold removal. There are many excellent sprays and cleaners on the market that do an effective job of mold removal. You do have to make sure that you completely dry the area after you clean to prevent the basement mold from growing back.

By: Peter Crump

Article Directory: http://www.articledashboard.com

To find out more about Mold removal visit Peter’s Website The Mold Removal Guide and find out about Mold Removal Products and more, including Mold allergies and toxic Mold.

Technorati Tags: basement, black, clean mold basement walls, get rid of, how do you kill mold growing in a basement, how to, killing, moisture, mold, products, removal, toxic

Basements can be such a headache and are notoriously damp or wet – unless we do something about it and here is an article which describes basement problems and possible remedies.

There are so many aspects to basement waterproofing but in this article I am going to focus solely on basement sub-slab perimeter drains (a.k.a. interior french drains). The process for installing these drainage systems is designed to relieve the hydrostatic pressure under the basement floor. Properly designed drain systems will accept water into them at a depth and pace to ensure that the water level does not reach the bottom side of your basements floor, or slab. The result of a properly installed and free flowing sub-slab drain is a dry basement by eliminating seepage and future flooding.

The installation process involves removal of 8″-18″ of concrete around the interior perimeter of your basement, and/or in chosen water problem areas. A sump location must be chosen and dug out. All of the concrete must be removed and a trench must be dug 8″-12″ graded from a far high point to the sump location. The grade is a necessary step in order to properly pitch the drain pipe. Virtually every basement waterproofing company has their own company procedures for drain installation.

The drain is installed, usually accompanied by large amounts of river gravel or processed stone, it is lead to a sump location and then the drain opening is closed up and recemented. The sump pump(s) is installed and the discharge line(s) is fed to the outside of the building. Many companies offer drip moldings for the perimeter and vapor barriers so that water coming through wall-cracks and pipe penetrations can be collected in the drain below the floor. These are the main features of an interior french drain, though there are many other custom offerings from companies worldwide.

So how is Green Bear Innovations, Inc. going to help this industry go green. We have aligned our corporate values with waterproofing industry experts and come up with solutions to what we believe are flaws in the common designs of these wet basement systems. Most basement waterproofing companies train their installers to jackhammer the entire perimeter of the basement. This poses three major problems:

1. Jackhammering a basement floor, or slab, with no detached edges causes a tremendous amount of stress and leads to microfractures in the remaining portion of the slab. Instead of having a wet basement or a flooding problem, now you could have a radon problem, as these microfractures turn into floor cracks.

2. The jagged edge that is created by the jackhammer is NOT a clean cut. The cement is cracked in many directions including underneath the floor. When recementing is done, not only does it look terrible, but due to the fact that old concrete and new cement does not bond, in a year or two you may have efflourescence and maybe even mold seeping through where these two types of cement meet. (See below for more information about how Green Bear Innovations will ensure that his does not happen to you.)

3. Jackhammering is very labor intensive, time intensive and causes silica dust from the concrete to cover everything in your basement that is uncovered.

So what’s the solution? Green Bear Innovations, Inc. will first use a concrete saw to cut a straight edge around the basement perimeter through the entire slab. We use a dust collector during this part of the installation process to reduce the amount of dust that can potentially settle on anything in sight. Once the perimeter cutting is complete, cross cuts will be made to section the waste concrete. A jackhammer, or hammer drill, will then be used to separate any stubborn slab pieces. Because the waste portion of the slab and the remaiing basement floor are detached, there is no risk of floor cracking.

We mentioned above that we will ensure that efflourescence and mold will not seep through the separation made by this installation method. What GBI does is thoroughly clean and wash the cut edge and apply a cement bonding glue (SilPro) immediately before the recementing process begins. You will never have anything creeping through this man made separation in your basement floor.

Green Bear Innovations is dedicated to using recycled/recyclable materials during all installations. We use 3″ and 4″ HDPE perforated pipe which is 100% recyclable and in the near future recycled HDPE pipe will be available. We use as little PVC as we can. PVC is recyclable but remains the number one pollutant of our world’s oceans due to the extensive recycling processes required for reuse.

GBI has eliminated an entire days labor and more, not by cutting corners, but by reducing the need for river gravel and recycling much of the soil that is extracted from the trench. We wrap our pipe with a stone mesh made from recycled plastic and place recycled low-float plastic pellets between the pipe and the mesh. This process eliminates the need for river gravel/processed stone and allows us to reuse the soil that was removed from the trench. Sandy and clay soils are mixed with clean fill before being used to ensue that water can freely enter the drain pipe.

Green Bear Innovations, Inc. offers energy efficient sump pumps and battery back up systems with all sub-slab basement drainage systems and even offers a water powered back up system. We also offer foundation wall vapor retarders and drip moldings made from 100% recycled plastics.

In summary, GBI is innovating the basement waterproofing industry in many ways. Our industry experience and extensive research have helped us save the earth’s resources and save consumers money in a home improvement sector that is known for resource gluttony and unaffordability.

By: greenbearinnovations

Article Directory: http://www.articledashboard.com

Lois Bartels is the owner of Green Bear Innovations, Massachusetts greenest home improvement company offering green insulation, basement waterproofing, foundation repair, sump pump installations, seamless gutters, replacement windows and doors, airsealing and weatherproofing, mold and radon assessment and remediation and complete home energy audits. We use energy efficient products, recycled/recyclable materials and hold a high standard for resource conservation during all installations. We are based in Reading, MA and serve the entire state and also RI, CT and NH. www.greenbearinnovations.com

To clean up mold that is already present make use of recommended mold cleaning products

To dry out the basement you can  make use of a dehumidifier

When cleaning the area of the mold spores that can fly about easily in the air you might want to  make use of a breathing mask

Once you have cleaned up the area and to prevent further infection  an air purifier is recommended.

Basement Waterproofing And Hydrostatic Pressure Damage

Basement flooding problems and water damage is a problem experienced by many homeowners, especially those who have older residences that haven’t been properly.  

How Does One Find Out How to Waterproof A Basement?

The basement waterproofing systems and their working. To answer that question, let’s first look at historically conventional basement waterproofing and how it.  

Insulating Basement Wall: Preventing Basement Problems

Aside from insulation, work on other basement damage prevention control scheme. The closest to this is the waterproofing of your basement. They are closely related and share the same objective – to prevent future damage of your basement 

Things To Consider For A Perfect Basement Wall System

So this is basement waterproofing comes in. Some basements have rubber plastic adhesive solutions layered in joints and walls to prevent moisture to set in. You may also want to check other basement wall system options in waterproofing. 

Technorati Tags: basement, cleaning, damage, damp, jackhammering, mold, prevent, prevention, problems, remedies, removal, resistant, walls, waterproof, waterproofing, wet