Since in the summer time, hurricane season is about at its peak, there are some precautions that you need to take to save your family from the dangers of black mold and health issues that happen after the hurricanes have done their damage.

Of course everyone has to get prepared to ride out these storms but for many people the battle against the dangers of black mould begins after the hurricanes are long gone.

How can you avoid these health effects after the hurricanes are gone? Keep reading and you will learn what mold types you need to watch out for and what the proper way to removal is when you are cleaning up and how it can prevent further mouldy outcrops.

Many people are just happy that they made it through the hurricanes with minimal damage. But what they do not realize is the damage they don’t see. Since there is a ton of rain that comes from these hurricanes there is a high percentage that your home will leak some water in from the windows or the doors. Not only do you have to worry about your house but other peoples home as well. The dangers of health issues will increase due to flooding of streets and unfortunately homes.

Mold growth will begin almost instantly and will start to dominate the neighborhoods. The reason why is because the growth spreads so fast that in time it will be uncontrollable. Black spores can attach itself to your skin and your shoes. Once you are exposed it will attach itself to your skin or clothes and you will import it right into your home and now you will have to worry about these dangers.

There are many different  health effects and a variety of health issues that you need to be aware of and realize how serious these dangers of black mold are. Different  types over time will become toxic and will thrive in your home until you decide to get rid of it by using proper removal tools when cleaning the home. The more you let it sit and reproduce, the more exposure you and your family will have to the dangers.

What are these dangers? For one, once you inhale these spores they will grow in your lungs and cause you upper respiratory problems, coughing, and fatigue and possible stomach problems. These are just some of the black mold health issues that are most common from the most popular types.

In order to be safe from the dangers you must take removal seriously when cleaning up. Make sure to have some reliable natural cleaners available ready and waiting to handle your mouldy problem before it gets out of hand. You need to have a plan before and after the storm just in case there is some growth present in your home after the storm has passed. Once you have a good handle on its removal you will know the benefits of having a “Mold Free” home and you and your family will not have to worry about the dangers or experiencing the related health issues in the future.

By: Drago Marx Article Directory: http://www.articledashboard.com  Do you experience mold symptoms due to black mould exposure? Find out how to clean up and learn the proper technique of removal.

Technorati Tags: allergy, clean up, cleaning, damage, health, huricane, mold, problems, removal, storm, water

Basements can be such a headache and are notoriously damp or wet – unless we do something about it and here is an article which describes basement problems and possible remedies.

There are so many aspects to basement waterproofing but in this article I am going to focus solely on basement sub-slab perimeter drains (a.k.a. interior french drains). The process for installing these drainage systems is designed to relieve the hydrostatic pressure under the basement floor. Properly designed drain systems will accept water into them at a depth and pace to ensure that the water level does not reach the bottom side of your basements floor, or slab. The result of a properly installed and free flowing sub-slab drain is a dry basement by eliminating seepage and future flooding.

The installation process involves removal of 8″-18″ of concrete around the interior perimeter of your basement, and/or in chosen water problem areas. A sump location must be chosen and dug out. All of the concrete must be removed and a trench must be dug 8″-12″ graded from a far high point to the sump location. The grade is a necessary step in order to properly pitch the drain pipe. Virtually every basement waterproofing company has their own company procedures for drain installation.

The drain is installed, usually accompanied by large amounts of river gravel or processed stone, it is lead to a sump location and then the drain opening is closed up and recemented. The sump pump(s) is installed and the discharge line(s) is fed to the outside of the building. Many companies offer drip moldings for the perimeter and vapor barriers so that water coming through wall-cracks and pipe penetrations can be collected in the drain below the floor. These are the main features of an interior french drain, though there are many other custom offerings from companies worldwide.

So how is Green Bear Innovations, Inc. going to help this industry go green. We have aligned our corporate values with waterproofing industry experts and come up with solutions to what we believe are flaws in the common designs of these wet basement systems. Most basement waterproofing companies train their installers to jackhammer the entire perimeter of the basement. This poses three major problems:

1. Jackhammering a basement floor, or slab, with no detached edges causes a tremendous amount of stress and leads to microfractures in the remaining portion of the slab. Instead of having a wet basement or a flooding problem, now you could have a radon problem, as these microfractures turn into floor cracks.

2. The jagged edge that is created by the jackhammer is NOT a clean cut. The cement is cracked in many directions including underneath the floor. When recementing is done, not only does it look terrible, but due to the fact that old concrete and new cement does not bond, in a year or two you may have efflourescence and maybe even mold seeping through where these two types of cement meet. (See below for more information about how Green Bear Innovations will ensure that his does not happen to you.)

3. Jackhammering is very labor intensive, time intensive and causes silica dust from the concrete to cover everything in your basement that is uncovered.

So what’s the solution? Green Bear Innovations, Inc. will first use a concrete saw to cut a straight edge around the basement perimeter through the entire slab. We use a dust collector during this part of the installation process to reduce the amount of dust that can potentially settle on anything in sight. Once the perimeter cutting is complete, cross cuts will be made to section the waste concrete. A jackhammer, or hammer drill, will then be used to separate any stubborn slab pieces. Because the waste portion of the slab and the remaiing basement floor are detached, there is no risk of floor cracking.

We mentioned above that we will ensure that efflourescence and mold will not seep through the separation made by this installation method. What GBI does is thoroughly clean and wash the cut edge and apply a cement bonding glue (SilPro) immediately before the recementing process begins. You will never have anything creeping through this man made separation in your basement floor.

Green Bear Innovations is dedicated to using recycled/recyclable materials during all installations. We use 3″ and 4″ HDPE perforated pipe which is 100% recyclable and in the near future recycled HDPE pipe will be available. We use as little PVC as we can. PVC is recyclable but remains the number one pollutant of our world’s oceans due to the extensive recycling processes required for reuse.

GBI has eliminated an entire days labor and more, not by cutting corners, but by reducing the need for river gravel and recycling much of the soil that is extracted from the trench. We wrap our pipe with a stone mesh made from recycled plastic and place recycled low-float plastic pellets between the pipe and the mesh. This process eliminates the need for river gravel/processed stone and allows us to reuse the soil that was removed from the trench. Sandy and clay soils are mixed with clean fill before being used to ensue that water can freely enter the drain pipe.

Green Bear Innovations, Inc. offers energy efficient sump pumps and battery back up systems with all sub-slab basement drainage systems and even offers a water powered back up system. We also offer foundation wall vapor retarders and drip moldings made from 100% recycled plastics.

In summary, GBI is innovating the basement waterproofing industry in many ways. Our industry experience and extensive research have helped us save the earth’s resources and save consumers money in a home improvement sector that is known for resource gluttony and unaffordability.

By: greenbearinnovations

Article Directory: http://www.articledashboard.com

Lois Bartels is the owner of Green Bear Innovations, Massachusetts greenest home improvement company offering green insulation, basement waterproofing, foundation repair, sump pump installations, seamless gutters, replacement windows and doors, airsealing and weatherproofing, mold and radon assessment and remediation and complete home energy audits. We use energy efficient products, recycled/recyclable materials and hold a high standard for resource conservation during all installations. We are based in Reading, MA and serve the entire state and also RI, CT and NH. www.greenbearinnovations.com

To clean up mold that is already present make use of recommended mold cleaning products

To dry out the basement you can  make use of a dehumidifier

When cleaning the area of the mold spores that can fly about easily in the air you might want to  make use of a breathing mask

Once you have cleaned up the area and to prevent further infection  an air purifier is recommended.

Basement Waterproofing And Hydrostatic Pressure Damage

Basement flooding problems and water damage is a problem experienced by many homeowners, especially those who have older residences that haven’t been properly.  

How Does One Find Out How to Waterproof A Basement?

The basement waterproofing systems and their working. To answer that question, let’s first look at historically conventional basement waterproofing and how it.  

Insulating Basement Wall: Preventing Basement Problems

Aside from insulation, work on other basement damage prevention control scheme. The closest to this is the waterproofing of your basement. They are closely related and share the same objective – to prevent future damage of your basement 

Things To Consider For A Perfect Basement Wall System

So this is basement waterproofing comes in. Some basements have rubber plastic adhesive solutions layered in joints and walls to prevent moisture to set in. You may also want to check other basement wall system options in waterproofing. 

Technorati Tags: basement, cleaning, damage, damp, jackhammering, mold, prevent, prevention, problems, remedies, removal, resistant, walls, waterproof, waterproofing, wet